These Poles are designed for use in Tents and Tarps within the provided heights. These poles are typically used in a lot of larger pyramid tents, and similar sized shelters.  These poles come standard with an adjuster for variable pitch heights, with shock cord, and with or without a spike at the top for use with shelters that use grommets.

Adjuster

The 710 pole comes standard with an adjuster that provides ~8″ of adjustment.

Pole heights with Adjuster:

You need to order your pole at the nominal height that your shelter pitches at. So if you have a shelter that pitches at 75″, you want to go with a pole that is 75″ long. With the adjuster this will give you a pole that pitches from ~71″ to ~79″.

Adjuster construction: The main stem of the adjuster is our carbon fiber tube. The bottom has a cap to keep dirt out.  The business end consists of a brass button on a spring inside the adjuster section. This brass button corresponds to holes that are machined into the bottom section of the tent pole. This gives adjustment in 1″ increments.

Shock Cord

The 710 poles come standard with shock cord.

Spike?

The 710 pole comes standard with a friendly plastic end cap on the top and bottom of the pole.  If your shelter requires a spike(like some large tarp set ups) then you can order the pole with a spike to accommodate your particular configuration.

4 Section .710 Tent Pole

  • A 75 Inch pole weighs 7.7oz, you can subtract .066oz per Inch shorter than 75 Inches
  • Choose your length in the pull down menu

$110

In Stock

Length
Spike?


4 section .710 Tent Pole

  • A 67 Inch poles weighs 7.1oz., you can subtract .066oz per inch shorter than 67 inches
  • Choose your length in the pull down menu

$105

In Stock

Length
Spike?





Ruta Locura