710 Tent Pole: These Poles are designed for use in Tents and Tarps within the provided heights. These poles are typically used in a lot of pyramid tents, and similar sized shelters. These poles come with an adjuster for variable pitch heights, and with or without a spike at the top for use with shelters that use grommets.
Adjuster: The 710 pole comes standard with an adjuster that provides ~8″ of adjustment.
Pole heights with Adjuster: You need to order your pole at the nominal height that your shelter pitches at. So if you have a shelter that pitches at 75″, you want to go with a pole that is 75″ long. With the adjuster this will give you a pole that pitches from ~71″ to ~79″. As another example, a 64″ tent pole will adjust from ~60″-68″.
Adjuster construction: The main stem of the adjuster is our carbon fiber tube. The bottom has a cap to keep dirt out. The business end consists of a brass button on a spring inside the adjuster section. This brass button corresponds to holes that are machined into the bottom section of the tent pole. This gives adjustment in 1″ increments.
Shock Cord: The 710 poles come standard with shock cord.
Spike/End Caps: The 710 pole comes standard with a friendly plastic end cap on the top and bottom of the pole. If your shelter requires a spike(like some large tarp set ups) then you can order the pole with a spike to accommodate your particular configuration.
4 section .710 Tent Pole
- A 75 Inch poles weighs 7.7oz., you can subtract .066oz per inch shorter than 75 inches
- Choose your length in the pull down menu. For poles 74″ or longer that will be used above tree line, or for winter use, consider the 820 series poles.
$110.00
Out of Stock
4 section .710 Tent Pole
- A 67 Inch poles weighs 7.1oz., you can subtract .066oz per inch shorter than 67 inches
- Choose your length in the pull down menu. For poles 74″ or longer that will be used above tree line, or for winter use, consider the 820 series poles.
$105.00
Out of Stock